It does not matter whether your doorknob is too rigid or just loose or old-fashioned or simply worn out, doorknobs can be replaced quite easily by anyone in spite of the design, size or shape. Therefore, if you are surfing for information on how to replace door knobs, you will find this article quite an interesting read. All you need to do is spare 3 minutes of your time to finish reading the entire article.
What you will need to replace door knobs?
For this procedure you will need to have the following in place:
- A new doorknob of course
- Assorted screwdrivers
- A Pry tool
Steps and guidelines in replacing door knobs?
- Buying a new doorknob
Before anything else, you need to buy a new doorknob. When purchasing a doorknob, it is important that look beyond the style. Search for something firm which will hold to everyday use and will last for years. In addition, take into account whether the doorknob will be utilized in the bedroom, closet, kitchen or bathroom. Contemplate whether you need a privacy lock on the doorknob. Purchase a doorknob alongside a pawl of equal length akin to the one that is being replaced.
- Removing the previous doorknob
Follow the steps given below to remove the old door knob
- Detach the two screws holding the face plate. To remove the screws, turn the screwdriver anticlockwise.
- Detach the two screws holding the knob plate. This will enable the two knobs to be loose. You need to prepare yourself as the knobs can fall from either side.
- Gently jerk the knobs on either side of the door.
- At this point you will see the pawl through the opening. Hold onto the pawl with two fingers and push it out of the hole.
- Remove the strike plate from the door frame by unscrewing the two screws holding the strike plate on the frame. With the screws remove, pry the strike plate off the doorframe.
- Installing the new door knob
Follow the instructions illustrated below to install the new doorknob
- Modern doorknobs are normally come with an option of faceplates. If this is the case with the doorknob that you have purchased, you can remove it by wrenching it off using the pry tool or a flat screwdriver. If there is need, then you can replace the faceplate with one that complements the opening on your door.
- Next, check whether the new strike plate and the pawl fits into the holes. If the new strike plate has square corners whereas the old one had rounded corners, you will have to adjust the openings. A hammer and a chisel can be utilized for this purpose.
- Insert the pawl mechanism together with the faceplate into the hole on the door. Make certain that the pawl is facing the direction towards which the door closes with. This means that the angled side will come into contact with the strike place. You should be able to push it with your hands.
- Secure the pawl mechanism tightly.
- Insert the knobs and secure them in place.
- Install the strike plate.
- Last but not least, check whether everything is working as required and make the necessary adjustment.
Related posts: